Pocked-sized Omega Charger is the world's first 200W Gallium Nitride (GaN) charger and also the world's smallest 200W charger that is up to 66% smaller than traditional chargers.

Omega Charger also comes in a 100W version which is the world's smallest 100W GaN charger similar to a box of Eclipse mints and even smaller than a credit card. With a host of improvements over 1st generation GaN Chargers, 100W Omega is truly a standout in being the world's first 2nd generation charger with graphene membrane for heat dissipation.

With 200W of power, there is always more than enough power to share around with 4 ports: 2 x USB-C Power Delivery 3.0 and 2 x USB-A (supporting QC3.0, AFC, VOOC, SCP & FCP).

The portability and high power means you will never need another charger for USB charging needs.

A world's first 200W portable charger provides the ability to quick charge a laptop (16" MacBook Pro), a tablet (iPad Pro), smartphone (iPhone), and mobile device (AirPods, Watch) all at the same time.

With 2 x 100W USB-C Power Delivery 3.0 PPS ports, a single 200W Omega charger can power 2 laptops (16" MacBook Pro) simultaneously, and at full speed. This is a gamechanger in charger technology, making it the first portable charger in the world to output 200W.

Omega Charger USB-A ports are compatible with a wide range of devices that support Quick Charge 3.0, AFC, VOOC, SCP, FCP almost all major fast charging protocols in the market from all major brands including Samsung, Huawei, Oppo, Vivo and Oneplus up to 22.5W.

At only 220g (0.49lb), you can easily fit 200W Omega Charger into any pocket and bring it with you wherever you go.

The 100W Omega is even smaller and lighter at 120g (0.26lb) giving you unrivalled portability

200W Omega charger in the world's first charger to features our patent-pending 2-way foldable prongs which can be adjusted at a 90° or 180° angle allowing you to fit Omega charger into any tough to fit wall plug whether its a floor or wall plug. 

The 100W Omega is so small its smaller than a credit card and comparable to a pack of Eclipse mints. The perfect portable charger for work, home and travel. 

Both 200W and 100W Omega Charger supports 100V - 240V worldwide universal voltage and comes included with 3 plug converters (AU/EU/UK) so that you can use it in 200+ countries worldwide. Please note the adapters are not interchangeable between the 200W and 100W models. 

200W Design

Chargeasap has spent over 8 months perfect the internal circuitry and firmware, taking close note of flaws and poor user experience in first generation GaN chargers to ensure the final product maximised the use of the Navitas GaNFast NV6127 for a better user experience. NV6127 is the latest chip from Navitas and has superior heat dissipation featuring a HQR PCBA structure- the most efficient GaN structure currently.

In order to make the smallest 100W and 200W charger ever, the circuit board and components are laid out in a very compact and space-efficient manner. By incorporating only industry leading components can we deliver superior performance in a pocket-sized charger. The dense circuit board is then surrounded by high-density thin heat sinks to aid in heat dissipation. An industry-first graphene membrane is strategically wrapped around major charger components to further aid in cooling.  The charger is then wrapped in a minimalist fire-resistant polycarbonate (PC) and Acrylonitrile butadiene styrene (ABS) enclosure to complete the design.

Getting to this final form factor was no easy task- we worked with 6 different factories over a year leading to alot of funds being used in mould fee's that weren't eventualised, with all but 1 failing to create the product in the perfect portable size we were after.

100W Design

Earlier Samples of 200W & 100W

Omega is a big leap for the world of GaN Chargers. With improved features including the latest Navitas GaN IC, graphene membrane and accurate power distribution, Omega Charger is proud to be a pioneer in being the world's first second generation GaN Chargers solving issues found commonly in first generation GaN chargers. 

Kickstarter backers are early adopters, however this early support often means backing a product that has not been tested widely in the real world leading many early products to be riddled with issues. First generation high-output GaN chargers experience many issues rendering a large percentage of products unusable or failing to meet user expectations. A Chargeasap survey of 4,538 respondents to our previous backers in July 2020 returned some startling results summarised in the infographic below.

Thank you to each and every respondent as your feedback has allowed us to create a charger that fixed the painpoints of limited chargers available today.

100W Omega utilizes the industry-leading Navitas GaNFast NV6127 Power IC (MOSEFT) which miniaturize silicon components found in traditional chargers. Gallium Nitride (GaN) is a semiconductor material that replaces traditional silicon-based power adapters allowing higher efficiency, less heat and the ability to handle a higher current.  GaN IC’s are over 10 times smaller than traditional IC’s a major advancement in the electronics field.

A voltage regulator is basically an integrated circuit that has several transistors within it, while a mosfet is exactly a single transistor. A MOSFET is a single transistor that will be able to provide a regulated voltage if used inside of a whole voltage regulator circuit (or IC).

200W Omega is the first portable charger in the world to feature not 1 but 2x Navitas GaNFast NV6127 MOSEFT designed and made in the USA enabling the 200W power to be reached with minimal heat and maximum efficieny. 1st generation GaN chargers use either Navitas chips from 2019 or a Chinese brand chips which are limited in their function and exhibit many functional issues.

One of the big advantages of GaN technology is superior 92% AC/DC efficiency (vs 91% for Apple/Anker). Omega generates less heat due to the high efficiency (vs Apple/Anker's 91%). Our charger efficiency is slightly more than 92% for both 110V and 220V inputs. 

Calculation: input is 220V 50Hz & input power is 106.4W. Output is 19.576V * 5A = 97.88W, and efficiency is 97.88/106.4 = 92%.

Calculated from the photo, input is 220V 50Hz & input power is 106.4W. Output is 19.576V * 5A=97.88W, and efficiency is 97.88/106.4= 92%. By our factory testing, the efficiency of 100W Hyperjuice is only 88% (vs their stated 95%) when using 110V. In comparison 100W & 200W Omega efficiency is 92% for both 110V and 220V inputs.

Navitas is the inventor of GaN power IC Technology, you can learn more about GaN here:


One of Omega's pioneering technologies is being the first charger to include a graphene membrane which is like a ribbon cooling sheet that's been carefully interlaced within the internal components to dissipate heat. 

This feature is combined with a high density nano heat sink commonly found in 1st generation GaN chargers which together ensure true heat dissipation particularly when used with high wattage devices.

The industry standard for charger maximum temperature is 65ºC internally and 130ºC externally. Both 100W Omega and 200W Omega will remain below 60ºC internally and 110ºC externally due to superior components include a more advanced GaN IC and the inclusion of a graphene membrane ribbon sheet.

Competitor product, world's first 100W GaN charger can be seen here reaching high 76.9°C temperature internally

We've completed extensive factory testing on GaN competitors to ensure if they are coming clean with their claims. The world's first 100W GaN charger can be seen here reaching 76.9°C internally, which suggests an external temperature in excess of 130°C. Note the test was only performed on 1 unit and was the competitor's brand earlier production, it's possible future production runs could have improvements that fixed this widely reported issue.

Competitor product, world's first 100W GaN charger can be seen here reaching high 76.9°C temperature internally

One of the flaws of 1st Generation GaN chargers is their lack of accurate intelligent power distribution. By not limiting the USB-C port when the USB-A port is used, its easy to confuse the charger which is why many competitor brand users have experienced many issues with their charger not working to their expectations. The solution is to specify the limit for each port and ensure they are independent, so there is no preference for power. Furthermore the true solution is to increase the output of the charger and hence the 200W GaN Charger will not fail to output 100W power for each of the 2 USB-C ports when multiple devices are connected.

200W Power Distribution

100W Power Distribution

Fast Recalibration

One of the shortfalls of current GaN chargers is a long recalibration time. This means when there is a device plugged into 1 USB-C port and you plug in another port it will not work for a few seconds. We've tested Omega to have a recalibration time is only 0.5sec vs Hyperjuice which from our testing is 3sec.


From the Team that brought you Flash: The World's Fastest Charging 100W USB-C Power Bank

We haven't forgotten about our Flash backers, Omega Charger is designed to be paired with Flash 1.0 and 2.0, ensuring the full 100W to enable the fastest power bank charge time in the world at only 70 minutes. For those who missed out on the Flash campaign we will be offering the powerbank at a special price to backers during the BackerKit phase.

 Or charge 2 Flash Powerbanks at the same time 

In order to achieve international certification for safe use, all chargers are put through a number of rigorous industrial tests to ensure Omega can withstand daily use.

1 Year International Warranty

With over 130,000 orders shipping, Chargesap is a well known and trusted brand in the crowdfunding and consumer electronics category. All our products are protected by our 1 year international warranty giving you peace of mind with your early support.

 200W Omega Technical Drawings

 200W Omega Specifications

100W Omega Technical Drawings

 100W Omega Specifications 

 How to Customise your Pledge

If you would like to purchase a combination of 200W and 100W Omega, you can do so during the BackerKit phase once the campaign has finished OR you can increase your pledge amount during the campaign. The price of the other charger model will depend on the tier you pledged initially, for example if you pledge 200W @ $75, then 100W @ $45 will be your price, similarly 200W @ $85 then 100W @ $55, 200W @ $95 then 100W at $65. 

For the whole world rewards will be delivered via air freight directly from our distribution centre in Shenzhen, China. Backers are also expected to receive rewards between 4-20 days from shipping depending on the size of the delivery and your country (including USA). We've chosen this costlier method so no matter what country you're supporting from you don't have the long transportation times of sea freight.

 Why We Need Your Support

We have already spent over $150,000 on NRE (non-recurring engineering) costs to develop the working samples and cover much of the initial mold fee. We depend on the support of Kickstarter backers to cover the cost of materials for the initial production run to bring Omega to life.

Press Release

Chargeasap is a consumer electronics startup originating from Sydney with a global team who believe users should be the creators and innovators of products. We realize that your mobile phone is the one object you interact with every day more than any other object or person, so why not simplify this interaction?

Our mission is to create highly innovative phone accessories that simplifies the way you interact with your mobile devices.

Our team consists of serial entrepreneurs, creatives and engineers who've worked together since 2015 to overcome painstaking obstacles to bring to life the vision of each life-changing product. Our international team is spread across the world from Sydney- Down Under to Bali- Indonesia, Shenzhen- China, Dubai- UAE and California- LA.  

We're a startup that is backed only by ourselves. We have no external investors. Instead we launch products through the magic of crowd funding. The funds raised here will not only go towards manufacturing, they will also help us to design future products.

We've already had 8 previous successful campaigns, raising over $4.5 million and delivering to more than 130 countries.  Our previous campaigns have been featured in hundreds of major publications and online media worldwide garnering over 150m views.

Thank you for your early support of Omega! The last USB charger you'll ever need.

To our Singapore supporters: A 200W Omega Charger will be featured at the WTP store in Singapore starting mid August 2020, stay tuned for more details.